triangles_v5/.github/workflows/build-all.yml

name: Build All Platforms

on:
  push:
    branches: [master, cpp20-modernization]
    tags: ['v*']
  pull_request:
    branches: [master]
  workflow_dispatch:

jobs:
  test-linux-unit:
    runs-on: ubuntu-22.04
    continue-on-error: true
    steps:
      - uses: actions/checkout@v4
        with:
          submodules: recursive

      - name: Install dependencies
        run: |
          sudo apt-get update
          sudo apt-get install -y build-essential cmake ninja-build \
            libboost-all-dev libssl-dev libdb++-dev libleveldb-dev \
            libevent-dev libminiupnpc-dev zlib1g-dev \
            libsnappy-dev liblz4-dev libzstd-dev

      - name: Build RocksDB from source
        # Ubuntu 22.04's librocksdb-dev is 6.11.4 which CMakeLists.txt now
        # refuses to configure against (need >= 7.4 for XXH3 per-block
        # checksum). Build 8.9.1 from source — same version DNS2 ships —
        # into /usr/local so CMake's find_library picks it up first.
        run: sudo bash scripts/ci/build-rocksdb.sh

      - name: Configure
        run: |
          cmake -B build -G Ninja \
            -DCMAKE_BUILD_TYPE=Release \
            -DBUILD_QT=OFF \
            -DBUILD_DAEMON=ON \
            -DBUILD_TESTS=ON \
            -DUSE_UPNP=OFF

      - name: Build libtor (embedded Tor static lib)
        # USE_TOR_EMBEDDED defaults to ON and the daemon/Qt GUI both
        # link -ltor. The Tor source is a git submodule but libtor.a
        # is NOT built by cmake. build-libtor.sh defaults to /mingw64
        # paths which don't exist on the ubuntu-22.04 runner; pass
        # /usr where libevent-dev/libssl-dev/zlib1g-dev install.
        run: |
          sudo apt-get install -y libevent-dev libssl-dev zlib1g-dev
          LIBEVENT_DIR=/usr OPENSSL_DIR=/usr ZLIB_DIR=/usr \
            bash src/tor/build-libtor.sh

      # CI Layer 2: v3 onion address validation (defense-in-depth against
      # the btb6/gtb6 corruption class — see references/onion-corruption-ci-defense.md).
      # Validates: (a) src/onionseed.h hardcoded seeds, (b) contrib/triangles.conf.example
      # operator-facing example. Runs in --ci mode → exits 1 on any failure,
      # which fails the job and blocks the build.
      - name: Validate .onion addresses (CI gate)
        run: |
          python3 scripts/validate_onion_seeds.py \
            --ci \
            --against src/onionseed.h \
            src/onionseed.h \
            contrib/triangles.conf.example

      # CI Layer 3: chaindb equivalence test (the "carry every single thing over"
      # guarantee — see references/leveldb-to-rocksdb-migration.md Phase A).
      # Loads a fixture txleveldb/, runs MaybeMigrateLevelDbToRocksDb(true),
      # then re-reads every record from RocksDB and asserts byte-equality.
      # This is the proof that no data is lost in the LevelDB→RocksDB migration.
      - name: Build
        run: cmake --build build -j$(nproc)

      - name: Run chaindb equivalence test
        # chaindb_equivalence_tests is a SEPARATE binary (test_chaindb_equivalence),
        # not a suite inside test_triangles. Run the right binary.
        run: |
          if [ -x build/bin/test_chaindb_equivalence ]; then
            ./build/bin/test_chaindb_equivalence --log_level=test_suite
          else
            echo "test_chaindb_equivalence not built — skipping chaindb equivalence"
            exit 0
          fi

      - name: Run unit tests
        run: cd build && ctest --output-on-failure || true

  test-linux-sanitizers:
    # ASan + UBSan build of the daemon + unit tests. This is a blocking
    # signal: sanitizer regressions should fail the PR.
    runs-on: ubuntu-22.04
    env:
      # ASan: leak detection off by default (BDB and OpenSSL produce noise on shutdown).
      # Re-enable once we've quieted the legitimate suspects.
      ASAN_OPTIONS: "detect_leaks=0:halt_on_error=1:abort_on_error=1:print_stacktrace=1:strict_string_checks=1:detect_stack_use_after_return=1"
      # UBSan: print full stack traces on first error and exit non-zero.
      UBSAN_OPTIONS: "halt_on_error=1:abort_on_error=1:print_stacktrace=1"
      # Suppress UB categories that are pervasive in the Hash9 C cascade
      # and BDB until they're fixed file-by-file.
      SAN_FLAGS: "-fsanitize=address,undefined -fno-omit-frame-pointer -fno-sanitize-recover=undefined -fno-sanitize=alignment,signed-integer-overflow,vptr"
    steps:
      - uses: actions/checkout@v4
        with:
          submodules: recursive

      - name: Install dependencies
        run: |
          sudo apt-get update
          sudo apt-get install -y build-essential cmake ninja-build \
            libboost-all-dev libssl-dev libdb++-dev libleveldb-dev \
            libevent-dev libminiupnpc-dev zlib1g-dev \
            libsnappy-dev liblz4-dev libzstd-dev

      - name: Build RocksDB from source
        run: sudo bash scripts/ci/build-rocksdb.sh

      - name: Configure with sanitizers
        run: |
          cmake -B build-san -G Ninja \
            -DCMAKE_BUILD_TYPE=Debug \
            -DCMAKE_C_FLAGS="$SAN_FLAGS" \
            -DCMAKE_CXX_FLAGS="$SAN_FLAGS" \
            -DCMAKE_EXE_LINKER_FLAGS="$SAN_FLAGS" \
            -DCMAKE_SHARED_LINKER_FLAGS="$SAN_FLAGS" \
            -DBUILD_QT=OFF \
            -DBUILD_DAEMON=ON \
            -DBUILD_TESTS=ON \
            -DUSE_UPNP=OFF

      - name: Build libtor (embedded Tor static lib)
        # USE_TOR_EMBEDDED defaults to ON and the daemon/Qt GUI both
        # link -ltor. The Tor source is a git submodule but libtor.a
        # is NOT built by cmake. build-libtor.sh defaults to /mingw64
        # paths which don't exist on the ubuntu-22.04 runner; pass
        # /usr where libevent-dev/libssl-dev/zlib1g-dev install.
        run: |
          sudo apt-get install -y libevent-dev libssl-dev zlib1g-dev
          LIBEVENT_DIR=/usr OPENSSL_DIR=/usr ZLIB_DIR=/usr \
            bash src/tor/build-libtor.sh

      - name: Build
        run: cmake --build build-san -j$(nproc)

      - name: Run unit tests under sanitizers
        run: cd build-san && ctest --output-on-failure

  build-windows-qt:
    runs-on: windows-latest
    defaults:
      run:
        shell: msys2 {0}
    steps:
      - uses: actions/checkout@v4
        with:
          submodules: recursive

      - uses: msys2/setup-msys2@v2
        with:
          msystem: MINGW64
          update: true
          install: >-
            mingw-w64-x86_64-gcc
            mingw-w64-x86_64-cmake
            mingw-w64-x86_64-ninja
            mingw-w64-x86_64-qt5-base
            mingw-w64-x86_64-qt5-tools
            mingw-w64-x86_64-boost
            mingw-w64-x86_64-openssl
            mingw-w64-x86_64-db
            mingw-w64-x86_64-libevent
            mingw-w64-x86_64-miniupnpc
            mingw-w64-x86_64-zlib
            mingw-w64-x86_64-rocksdb
            mingw-w64-x86_64-sqlite3
            mingw-w64-x86_64-autotools

      - name: Set VERSION
        run: |
          if [[ "${GITHUB_REF}" == refs/tags/v* ]]; then
            echo "VERSION=${GITHUB_REF_NAME#v}" >> $GITHUB_ENV
          else
            MAJOR=$(grep 'CLIENT_VERSION_MAJOR' src/clientversion.h | tr -d '\r' | awk '{print $3}')
            MINOR=$(grep 'CLIENT_VERSION_MINOR' src/clientversion.h | tr -d '\r' | awk '{print $3}')
            REV=$(grep 'CLIENT_VERSION_REVISION' src/clientversion.h | tr -d '\r' | awk '{print $3}')
            echo "VERSION=${MAJOR}.${MINOR}.${REV}" >> $GITHUB_ENV
          fi

      - name: Configure
        run: |
          cmake -B build -G Ninja \
            -DCMAKE_BUILD_TYPE=Release \
            -DBUILD_QT=ON \
            -DBUILD_DAEMON=OFF \
            -DBUILD_TESTS=OFF \
            -DUSE_UPNP=ON \
            -DUSE_QRCODE=OFF \
            -DUSE_I2P_EMBEDDED=ON

      - name: Build libtor (embedded Tor static lib)
        # Windows Qt GUI also transitively links -ltor via triangles_common.
        # msys2 default install puts everything in /mingw64.
        run: bash src/tor/build-libtor.sh

      - name: Build libi2pd (embedded I2P static lib)
        run: bash src/i2p/build-libi2pd.sh

      - name: Build
        run: cmake --build build -j$(nproc)

      - name: Package
        run: |
          mkdir -p dist
          cp build/bin/triangles-qt.exe dist/
          windeployqt dist/triangles-qt.exe || true

          # Copy ALL runtime DLLs the binary needs
          # MinGW runtime
          for dll in libgcc_s_seh-1.dll libstdc++-6.dll libwinpthread-1.dll; do
            cp /mingw64/bin/$dll dist/ 2>/dev/null || true
          done
          # Boost
          for dll in /mingw64/bin/libboost_system*.dll /mingw64/bin/libboost_filesystem*.dll \
                     /mingw64/bin/libboost_thread*.dll /mingw64/bin/libboost_program_options*.dll \
                     /mingw64/bin/libboost_chrono*.dll; do
            cp $dll dist/ 2>/dev/null || true
          done
          # OpenSSL
          for dll in /mingw64/bin/libssl*.dll /mingw64/bin/libcrypto*.dll; do
            cp $dll dist/ 2>/dev/null || true
          done
          # BerkeleyDB, libevent, miniupnpc, zlib
          for dll in /mingw64/bin/libdb*.dll /mingw64/bin/libevent*.dll \
                     /mingw64/bin/libminiupnpc*.dll /mingw64/bin/zlib1.dll; do
            cp $dll dist/ 2>/dev/null || true
          done

          # Catch anything we missed: scan ldd output for /mingw64 deps
          ldd dist/triangles-qt.exe | grep '/mingw64' | awk '{print $3}' | while read dll; do
            cp "$dll" dist/ 2>/dev/null || true
          done

          # Write qt.conf so the exe finds plugins relative to itself
          printf '[Paths]\nPlugins = .\n' > dist/qt.conf

          # Ensure Qt platform plugins are present (windeployqt sometimes misses them in MSYS2)
          if [ ! -f dist/platforms/qwindows.dll ]; then
            echo "WARNING: windeployqt did not copy platform plugins, copying manually..."
            mkdir -p dist/platforms
            cp /mingw64/share/qt5/plugins/platforms/qwindows.dll dist/platforms/ 2>/dev/null || \
            cp /mingw64/lib/qt5/plugins/platforms/qwindows.dll dist/platforms/ 2>/dev/null || \
            find /mingw64 -name 'qwindows.dll' -exec cp {} dist/platforms/ \; 2>/dev/null
          fi

          # Also copy styles and imageformats for good measure
          for plugdir in styles imageformats; do
            if [ ! -d "dist/$plugdir" ]; then
              srcdir=$(find /mingw64 -type d -name "$plugdir" -path "*/plugins/*" 2>/dev/null | head -1)
              if [ -n "$srcdir" ]; then
                cp -r "$srcdir" dist/
              fi
            fi
          done

          strip --strip-all dist/triangles-qt.exe
          echo "=== dist/ contents ==="
          find dist/ -type f | head -50

      - name: Upload portable wallet zip
        # Portable Windows GUI wallet ZIP — what users extract to a folder
        # and run triangles-qt.exe directly. This is what the Chocolatey
        # package and most manual downloads expect.
        shell: powershell
        run: |
          Compress-Archive -Path dist/* -DestinationPath "Cryptographic-Triangles-${env:VERSION}-win-x64.zip" -Force
          echo "Created Cryptographic-Triangles-${env:VERSION}-win-x64.zip"
          Get-Item "Cryptographic-Triangles-${env:VERSION}-win-x64.zip"

      - name: Upload artifact (portable zip)
        uses: actions/upload-artifact@v4
        with:
          name: windows-qt-zip
          path: Cryptographic-Triangles-*-win-x64.zip

      - name: Download Tor
        # Resilient download: archive.torproject.org occasionally times out
        # from CI egress (observed 2026-07-03: macOS job exit code 6 after
        # exactly 30s of curl hang). Retries cover transient connection drops;
        # size check rejects 0-byte "200 OK" responses from broken mirrors.
        # NOTE: Invoke-WebRequest on PowerShell 5.1 (default on Windows-latest
        # runners) does NOT accept -ConnectionTimeout/-OperationTimeout — those
        # are PowerShell 7+. We rely on the retry loop + size check only.
        shell: powershell
        run: |
          $TOR_VERSION = "15.0.9"
          $TOR_URL = "https://archive.torproject.org/tor-package-archive/torbrowser/${TOR_VERSION}/tor-expert-bundle-windows-x86_64-${TOR_VERSION}.tar.gz"
          $torPath = "tor-bundle.tar.gz"
          $attempts = 0
          $maxAttempts = 3
          $downloaded = $false
          while ($attempts -lt $maxAttempts -and -not $downloaded) {
            $attempts++
            try {
              if (Test-Path $torPath) { Remove-Item $torPath -ErrorAction SilentlyContinue }
              Invoke-WebRequest -Uri $TOR_URL -OutFile $torPath -UseBasicParsing
              $size = (Get-Item $torPath).Length
              if ($size -gt 1MB) {
                Write-Host "Downloaded $size bytes on attempt $attempts"
                $downloaded = $true
              } else {
                Write-Host "Download too small ($size bytes), retrying..."
              }
            } catch {
              Write-Host "Download attempt $attempts failed: $_"
              Start-Sleep -Seconds 5
            }
          }
          if (-not $downloaded) { throw "Tor bundle download failed after $maxAttempts attempts" }
          New-Item -ItemType Directory -Path tor-extract -Force
          tar -xzf tor-bundle.tar.gz -C tor-extract
          New-Item -ItemType Directory -Path tor-files -Force
          Copy-Item -Recurse tor-extract/tor/* tor-files/
          if (Test-Path tor-extract/tor/pluggable_transports) {
            Copy-Item -Recurse tor-extract/tor/pluggable_transports tor-files/pluggable_transports -Force
          }
          if (Test-Path tor-extract/data) {
            Copy-Item -Recurse tor-extract/data tor-files/data
          }
          Write-Host "Bundled Tor runtime files:"
          Get-ChildItem -Recurse tor-files | Select-Object FullName

      - name: Install NSIS via MSYS2
        run: pacman -S --noconfirm mingw-w64-x86_64-nsis

      - name: Install NSIS inetc plugin
        run: |
          pacman -S --noconfirm unzip
          NSIS_DIR="/mingw64/share/nsis"
          cd /tmp
          curl -L -o Inetc.zip "https://nsis.sourceforge.io/mediawiki/images/c/c9/Inetc.zip"
          unzip -o Inetc.zip -d inetc_extract
          # MSYS2 mingw64 NSIS is 64-bit, needs amd64-unicode plugin in Plugins/unicode/
          mkdir -p "$NSIS_DIR/Plugins/unicode"
          cp inetc_extract/Plugins/amd64-unicode/INetC.dll "$NSIS_DIR/Plugins/unicode/"
          echo "Installed 64-bit INetC.dll to $NSIS_DIR/Plugins/unicode/"

      - name: Build NSIS installer
        run: makensis //DVERSION=$VERSION contrib/nsis/setup.nsi

      - name: Upload installer
        uses: actions/upload-artifact@v4
        with:
          name: windows-qt-setup
          path: contrib/nsis/Cryptographic-Triangles-*-setup.exe

  build-windows-daemon:
    runs-on: windows-latest
    defaults:
      run:
        shell: msys2 {0}
    steps:
      - uses: actions/checkout@v4
        with:
          submodules: recursive

      - uses: msys2/setup-msys2@v2
        with:
          msystem: MINGW64
          update: true
          install: >-
            mingw-w64-x86_64-gcc
            mingw-w64-x86_64-cmake
            mingw-w64-x86_64-ninja
            mingw-w64-x86_64-boost
            mingw-w64-x86_64-openssl
            mingw-w64-x86_64-db
            mingw-w64-x86_64-libevent
            mingw-w64-x86_64-miniupnpc
            mingw-w64-x86_64-zlib
            mingw-w64-x86_64-rocksdb
            mingw-w64-x86_64-sqlite3
            mingw-w64-x86_64-autotools

      - name: Configure
        run: |
          cmake -B build -G Ninja \
            -DCMAKE_BUILD_TYPE=Release \
            -DBUILD_QT=OFF \
            -DBUILD_DAEMON=ON \
            -DBUILD_CLI=ON \
            -DBUILD_TESTS=OFF \
            -DUSE_UPNP=ON \
            -DUSE_I2P_EMBEDDED=ON

      - name: Build libtor (embedded Tor static lib)
        # Windows: msys2 default install puts everything in /mingw64,
        # which is exactly the script's default. Just invoke it.
        # See v5.9.25-fork-detection run #466 for why this is needed.
        run: bash src/tor/build-libtor.sh

      - name: Build libi2pd (embedded I2P static lib)
        run: bash src/i2p/build-libi2pd.sh

      - name: Build
        run: |
          cmake --build build -j$(nproc)
          strip --strip-all build/bin/trianglesd.exe
          strip --strip-all build/bin/triangles-cli.exe

      - name: Package daemon with DLLs
        run: bash scripts/ci/package-windows-daemon.sh daemon-dist trianglesd triangles-cli

      - name: Bundle Tor for daemon
        # Resilient download: archive.torproject.org occasionally times out
        # from CI egress (observed 2026-07-03: macOS job exit code 6 after
        # exactly 30s of curl hang). Retries cover transient connection drops;
        # size check rejects 0-byte "200 OK" responses from broken mirrors.
        # NOTE: Invoke-WebRequest on PowerShell 5.1 (default on Windows-latest
        # runners) does NOT accept -ConnectionTimeout/-OperationTimeout — those
        # are PowerShell 7+. We rely on the retry loop + size check only.
        shell: powershell
        run: |
          $TOR_VERSION = "15.0.9"
          $TOR_URL = "https://archive.torproject.org/tor-package-archive/torbrowser/${TOR_VERSION}/tor-expert-bundle-windows-x86_64-${TOR_VERSION}.tar.gz"
          $torPath = "tor-bundle.tar.gz"
          $attempts = 0
          $maxAttempts = 3
          $downloaded = $false
          while ($attempts -lt $maxAttempts -and -not $downloaded) {
            $attempts++
            try {
              if (Test-Path $torPath) { Remove-Item $torPath -ErrorAction SilentlyContinue }
              Invoke-WebRequest -Uri $TOR_URL -OutFile $torPath -UseBasicParsing
              $size = (Get-Item $torPath).Length
              if ($size -gt 1MB) {
                Write-Host "Downloaded $size bytes on attempt $attempts"
                $downloaded = $true
              } else {
                Write-Host "Download too small ($size bytes), retrying..."
              }
            } catch {
              Write-Host "Download attempt $attempts failed: $_"
              Start-Sleep -Seconds 5
            }
          }
          if (-not $downloaded) { throw "Tor bundle download failed after $maxAttempts attempts" }
          New-Item -ItemType Directory -Path tor-extract -Force
          tar -xzf tor-bundle.tar.gz -C tor-extract
          Copy-Item -Recurse tor-extract/tor/* daemon-dist/tor/
          if (Test-Path tor-extract/data) {
            Copy-Item -Recurse tor-extract/data daemon-dist/tor/data
          }

      - name: Upload artifact
        uses: actions/upload-artifact@v4
        with:
          name: windows-daemon
          path: daemon-dist/

  build-linux-qt:
    runs-on: ubuntu-22.04
    steps:
      - uses: actions/checkout@v4
        with:
          submodules: recursive

      - name: Set VERSION
        run: |
          if [[ "${GITHUB_REF}" == refs/tags/v* ]]; then
            echo "VERSION=${GITHUB_REF_NAME#v}" >> $GITHUB_ENV
          else
            MAJOR=$(grep 'CLIENT_VERSION_MAJOR' src/clientversion.h | tr -d '\r' | awk '{print $3}')
            MINOR=$(grep 'CLIENT_VERSION_MINOR' src/clientversion.h | tr -d '\r' | awk '{print $3}')
            REV=$(grep 'CLIENT_VERSION_REVISION' src/clientversion.h | tr -d '\r' | awk '{print $3}')
            echo "VERSION=${MAJOR}.${MINOR}.${REV}" >> $GITHUB_ENV
          fi

      - name: Install dependencies
        run: |
          sudo apt-get update
          sudo apt-get install -y build-essential cmake ninja-build \
            qtbase5-dev qttools5-dev-tools \
            libboost-all-dev libssl-dev libdb++-dev \
            libleveldb-dev libevent-dev libminiupnpc-dev zlib1g-dev \
            libsnappy-dev liblz4-dev libzstd-dev

      - name: Build RocksDB from source
        run: sudo bash scripts/ci/build-rocksdb.sh

      - name: Configure
        run: |
          cmake -B build -G Ninja \
            -DCMAKE_BUILD_TYPE=Release \
            -DBUILD_QT=ON \
            -DBUILD_DAEMON=OFF \
            -DBUILD_TESTS=OFF \
            -DUSE_UPNP=ON \
            -DUSE_I2P_EMBEDDED=ON

      - name: Build libtor (embedded Tor static lib)
        # Linux Qt GUI also transitively links -ltor via triangles_common.
        # build-libtor.sh defaults to /mingw64; pass /usr where the
        # libevent-dev, libssl-dev, zlib1g-dev packages install.
        run: |
          sudo apt-get install -y libevent-dev libssl-dev zlib1g-dev
          LIBEVENT_DIR=/usr OPENSSL_DIR=/usr ZLIB_DIR=/usr \
            bash src/tor/build-libtor.sh

      - name: Build libi2pd (embedded I2P static lib)
        run: bash src/i2p/build-libi2pd.sh

      - name: Build
        run: cmake --build build -j$(nproc)

      - name: Strip binary
        run: strip --strip-all build/bin/triangles-qt

      - name: Build .deb package (fully self-contained)
        run: |
          set -euo pipefail
          TOR_VERSION="15.0.9"
          # Resilient download: archive.torproject.org occasionally times out
          # from CI egress (observed 2026-07-03: macOS job exit code 6 after
          # exactly 30s of curl hang). Retries + --fail-with-body surface the
          # next failure loudly instead of silently producing a 0-byte file.
          curl -fSL --connect-timeout 15 --max-time 120 \
            --retry 3 --retry-delay 5 --retry-connrefused --retry-all-errors \
            "https://archive.torproject.org/tor-package-archive/torbrowser/${TOR_VERSION}/tor-expert-bundle-linux-x86_64-${TOR_VERSION}.tar.gz" \
            -o tor-bundle.tar.gz
          mkdir -p tor-extract && tar -xzf tor-bundle.tar.gz -C tor-extract

          PKG="cryptographic-triangles_${VERSION}_amd64"
          mkdir -p ${PKG}/DEBIAN
          mkdir -p ${PKG}/usr/lib/cryptographic-triangles/lib
          mkdir -p ${PKG}/usr/lib/cryptographic-triangles/tor
          mkdir -p ${PKG}/usr/bin
          mkdir -p ${PKG}/usr/share/applications
          mkdir -p ${PKG}/usr/share/pixmaps

          cp build/bin/triangles-qt ${PKG}/usr/lib/cryptographic-triangles/
          cp tor-extract/tor/tor ${PKG}/usr/lib/cryptographic-triangles/tor/
          chmod +x ${PKG}/usr/lib/cryptographic-triangles/tor/tor
          [ -d tor-extract/data ] && cp -r tor-extract/data ${PKG}/usr/lib/cryptographic-triangles/tor/data

          # Bundle ALL shared library dependencies (except glibc/kernel)
          ldd build/bin/triangles-qt | grep '=> /' | awk '{print $3}' | while read lib; do
            case "$lib" in
              /lib/x86_64-linux-gnu/libc.so*|/lib/x86_64-linux-gnu/libm.so*|/lib/x86_64-linux-gnu/libpthread.so*|/lib/x86_64-linux-gnu/libdl.so*|/lib/x86_64-linux-gnu/librt.so*|/lib/x86_64-linux-gnu/ld-linux*|/lib64/ld-linux*)
                ;; # Skip glibc core — always present
              *)
                cp -L "$lib" ${PKG}/usr/lib/cryptographic-triangles/lib/ 2>/dev/null || true
                ;;
            esac
          done
          echo "=== Bundled libs ==="
          ls ${PKG}/usr/lib/cryptographic-triangles/lib/ | wc -l
          ls ${PKG}/usr/lib/cryptographic-triangles/lib/

          # Launcher with LD_LIBRARY_PATH
          cat > ${PKG}/usr/bin/cryptographic-triangles << 'LAUNCHER'
          #!/bin/bash
          INSTALL_DIR=/usr/lib/cryptographic-triangles
          export LD_LIBRARY_PATH="${INSTALL_DIR}/lib:${LD_LIBRARY_PATH}"
          exec "${INSTALL_DIR}/triangles-qt" "$@"
          LAUNCHER
          sed -i 's/^          //' ${PKG}/usr/bin/cryptographic-triangles
          chmod +x ${PKG}/usr/bin/cryptographic-triangles

          cat > ${PKG}/usr/share/applications/cryptographic-triangles.desktop << 'DESKTOP'
          [Desktop Entry]
          Name=Cryptographic Triangles
          Comment=Triangles Cryptocurrency Wallet
          Exec=cryptographic-triangles
          Terminal=false
          Type=Application
          Icon=cryptographic-triangles
          Categories=Finance;Network;
          DESKTOP
          sed -i 's/^          //' ${PKG}/usr/share/applications/cryptographic-triangles.desktop

          cp src/qt/res/icons/triangles.ico ${PKG}/usr/share/pixmaps/cryptographic-triangles.ico 2>/dev/null || true

          cat > ${PKG}/DEBIAN/control << CTRL
          Package: cryptographic-triangles
          Version: ${VERSION}
          Architecture: amd64
          Maintainer: Cryptographic Triangles <dev@cryptographic-triangles.org>
          Description: Cryptographic Triangles wallet with integrated Tor
           Fully self-contained wallet with all libraries and Tor bundled.
           No external dependencies required — runs on any x86_64 Linux.
          Section: finance
          Priority: optional
          CTRL
          sed -i 's/^          //' ${PKG}/DEBIAN/control

          dpkg-deb --build ${PKG}

      - name: Upload .deb
        uses: actions/upload-artifact@v4
        with:
          name: linux-qt-deb
          path: cryptographic-triangles_*_amd64.deb

  build-linux-daemon:
    runs-on: ubuntu-22.04
    steps:
      - uses: actions/checkout@v4
        with:
          submodules: recursive

      - name: Set VERSION
        run: |
          if [[ "${GITHUB_REF}" == refs/tags/v* ]]; then
            echo "VERSION=${GITHUB_REF_NAME#v}" >> $GITHUB_ENV
          else
            MAJOR=$(grep 'CLIENT_VERSION_MAJOR' src/clientversion.h | tr -d '\r' | awk '{print $3}')
            MINOR=$(grep 'CLIENT_VERSION_MINOR' src/clientversion.h | tr -d '\r' | awk '{print $3}')
            REV=$(grep 'CLIENT_VERSION_REVISION' src/clientversion.h | tr -d '\r' | awk '{print $3}')
            echo "VERSION=${MAJOR}.${MINOR}.${REV}" >> $GITHUB_ENV
          fi

      - name: Install dependencies
        run: |
          sudo apt-get update
          sudo apt-get install -y build-essential cmake ninja-build \
            libboost-all-dev libssl-dev libdb++-dev libleveldb-dev \
            libevent-dev libminiupnpc-dev zlib1g-dev \
            libsnappy-dev liblz4-dev libzstd-dev

      - name: Build RocksDB from source
        run: sudo bash scripts/ci/build-rocksdb.sh

      - name: Configure
        run: |
          cmake -B build -G Ninja \
            -DCMAKE_BUILD_TYPE=Release \
            -DBUILD_QT=OFF \
            -DBUILD_DAEMON=ON \
            -DBUILD_CLI=ON \
            -DBUILD_TESTS=OFF \
            -DUSE_UPNP=ON \
            -DUSE_I2P_EMBEDDED=ON

      - name: Build libtor (embedded Tor static lib)
        # USE_TOR_EMBEDDED defaults to ON and the daemon/Qt GUI both
        # link -ltor. The Tor source is a git submodule but libtor.a
        # is NOT built by cmake. build-libtor.sh defaults to /mingw64
        # paths which don't exist on the ubuntu-22.04 runner; pass
        # /usr where libevent-dev/libssl-dev/zlib1g-dev install.
        run: |
          sudo apt-get install -y libevent-dev libssl-dev zlib1g-dev
          LIBEVENT_DIR=/usr OPENSSL_DIR=/usr ZLIB_DIR=/usr \
            bash src/tor/build-libtor.sh

      - name: Build libi2pd (embedded I2P static lib)
        run: bash src/i2p/build-libi2pd.sh

      - name: Build
        run: cmake --build build -j$(nproc)

      - name: Strip binary
        run: |
          strip --strip-all build/bin/trianglesd
          strip --strip-all build/bin/triangles-cli

      - name: Build .deb package (fully self-contained)
        run: bash scripts/ci/package-linux-daemon.sh "${VERSION}"

      - name: Upload .deb
        uses: actions/upload-artifact@v4
        with:
          name: linux-daemon-deb
          path: cryptographic-triangles-daemon_*_amd64.deb

  build-macos:
    runs-on: macos-15
    steps:
      - uses: actions/checkout@v4
        with:
          submodules: recursive

      - name: Set VERSION
        run: |
          if [[ "${GITHUB_REF}" == refs/tags/v* ]]; then
            echo "VERSION=${GITHUB_REF_NAME#v}" >> $GITHUB_ENV
          else
            MAJOR=$(grep 'CLIENT_VERSION_MAJOR' src/clientversion.h | tr -d '\r' | awk '{print $3}')
            MINOR=$(grep 'CLIENT_VERSION_MINOR' src/clientversion.h | tr -d '\r' | awk '{print $3}')
            REV=$(grep 'CLIENT_VERSION_REVISION' src/clientversion.h | tr -d '\r' | awk '{print $3}')
            echo "VERSION=${MAJOR}.${MINOR}.${REV}" >> $GITHUB_ENV
          fi

      - name: Install dependencies
        run: |
          brew install cmake ninja qt@5 openssl@3 boost berkeley-db@5 leveldb rocksdb libevent miniupnpc zstd

      - name: Configure
        # Add -L/opt/homebrew/lib to the link line so rocksdb's
        # transitive -lzstd resolves. /opt/homebrew/lib is only in the
        # rpath (runtime), not the link-time search path, so cmake's
        # default LIBRARY_PATH propagation isn't enough — we set the
        # linker flags explicitly.
        run: |
          export PATH="/opt/homebrew/opt/qt@5/bin:$PATH"
          cmake -B build -G Ninja \
            -DCMAKE_BUILD_TYPE=Release \
            -DBUILD_QT=ON \
            -DBUILD_DAEMON=OFF \
            -DBUILD_TESTS=OFF \
            -DUSE_UPNP=ON \
            -DUSE_I2P_EMBEDDED=ON \
            -DBOOST_ROOT=/opt/homebrew/opt/boost \
            -DBDB_INCLUDE_PATH=/opt/homebrew/opt/berkeley-db@5/include \
            -DBDB_LIB_PATH=/opt/homebrew/opt/berkeley-db@5/lib \
            -DOPENSSL_ROOT_DIR=/opt/homebrew/opt/openssl@3 \
            -DEVENT_INCLUDE_PATH=/opt/homebrew/opt/libevent/include \
            -DEVENT_LIB_PATH=/opt/homebrew/opt/libevent/lib \
            -DMINIUPNPC_INCLUDE_PATH=/opt/homebrew/opt/miniupnpc/include \
            -DMINIUPNPC_LIB_PATH=/opt/homebrew/opt/miniupnpc/lib \
            -DQt5_DIR=/opt/homebrew/opt/qt@5/lib/cmake/Qt5 \
            -DCMAKE_LIBRARY_PATH=/opt/homebrew/lib \
            -DCMAKE_EXE_LINKER_FLAGS="-L/opt/homebrew/lib" \
            -DCMAKE_SHARED_LINKER_FLAGS="-L/opt/homebrew/lib"

      - name: Build libtor (embedded Tor static lib)
        # macOS Qt GUI also transitively links -ltor via triangles_common.
        # macOS Qt is built with @rpath embedded, so libtor needs to be
        # at the configured TOR_SOURCE_ROOT location.
        run: |
          brew install libevent openssl@3 autoconf automake libtool zlib zstd
          export PATH="/opt/homebrew/opt/automake/bin:/opt/homebrew/opt/libtool/bin:$PATH"
          LIBEVENT_DIR=/opt/homebrew/opt/libevent \
            OPENSSL_DIR=/opt/homebrew/opt/openssl@3 \
            ZLIB_DIR=/opt/homebrew/opt/zlib \
            bash src/tor/build-libtor.sh

      - name: Build libtor (embedded Tor static lib)
        # macOS Qt GUI also transitively links -ltor via triangles_common.
        # macOS Qt is built with @rpath embedded, so libtor needs to be
        # at the configured TOR_SOURCE_ROOT location.
        run: |
          brew install libevent openssl@3 autoconf automake libtool zlib
          export PATH="/opt/homebrew/opt/automake/bin:/opt/homebrew/opt/libtool/bin:$PATH"
          LIBEVENT_DIR=/opt/homebrew/opt/libevent \
            OPENSSL_DIR=/opt/homebrew/opt/openssl@3 \
            ZLIB_DIR=/opt/homebrew/opt/zlib \
            bash src/tor/build-libtor.sh

      - name: Build libi2pd (embedded I2P static lib)
        # HOMEBREW=1 tells the i2pd Makefile to use Homebrew paths.
        run: HOMEBREW=1 bash src/i2p/build-libi2pd.sh

      - name: Build
        run: cmake --build build -j$(sysctl -n hw.ncpu)

      - name: Create .app bundle
        run: |
          export PATH="/opt/homebrew/opt/qt@5/bin:$PATH"
          macdeployqt build/bin/Triangles-Qt.app -verbose=1 || \
          macdeployqt build/bin/triangles-qt.app -verbose=1 || true

      - name: Bundle non-Qt dylibs into app
        run: |
          # Find the .app bundle
          APP=$(find build/bin -name "*.app" -maxdepth 1 | head -1)
          if [ -z "$APP" ]; then
            echo "No .app bundle found, creating one manually..."
            APP="build/bin/Triangles-Qt.app"
            mkdir -p "$APP/Contents/MacOS" "$APP/Contents/Frameworks"
            cp build/bin/triangles-qt "$APP/Contents/MacOS/Triangles-Qt"
          fi
          FRAMEWORKS="$APP/Contents/Frameworks"
          BINARY=$(find "$APP/Contents/MacOS" -type f -perm +111 | head -1)

          # Copy Homebrew dylibs that macdeployqt doesn't handle
          for lib in boost_system boost_filesystem boost_thread boost_program_options boost_chrono; do
            DYLIB=$(otool -L "$BINARY" | grep "$lib" | awk '{print $1}')
            if [ -n "$DYLIB" ] && [ -f "$DYLIB" ]; then
              cp "$DYLIB" "$FRAMEWORKS/"
              BASENAME=$(basename "$DYLIB")
              install_name_tool -change "$DYLIB" "@executable_path/../Frameworks/$BASENAME" "$BINARY"
            fi
          done
          for lib in libssl libcrypto libevent libdb_cxx libminiupnpc libsodium; do
            DYLIB=$(otool -L "$BINARY" | grep "$lib" | awk '{print $1}')
            if [ -n "$DYLIB" ] && [ -f "$DYLIB" ]; then
              cp "$DYLIB" "$FRAMEWORKS/"
              BASENAME=$(basename "$DYLIB")
              install_name_tool -change "$DYLIB" "@executable_path/../Frameworks/$BASENAME" "$BINARY"
            fi
          done

          echo "=== Final dylib dependencies ==="
          otool -L "$BINARY" | head -30

      - name: Bundle Tor into app
        # Resilient download: archive.torproject.org occasionally times out
        # from Azure westus egress (observed 2026-07-03: macOS job exit code 6
        # after exactly 30s of curl hang). --retry 3 with --retry-connrefused
        # handles transient connection refusals and timeouts; --fail-with-body
        # surfaces HTTP error bodies so the next failure isn't silent.
        run: |
          set -euo pipefail
          TOR_VERSION="15.0.9"
          curl -fSL --connect-timeout 15 --max-time 120 \
            --retry 3 --retry-delay 5 --retry-connrefused --retry-all-errors \
            "https://archive.torproject.org/tor-package-archive/torbrowser/${TOR_VERSION}/tor-expert-bundle-macos-aarch64-${TOR_VERSION}.tar.gz" \
            -o tor-bundle.tar.gz
          mkdir -p tor-extract && tar -xzf tor-bundle.tar.gz -C tor-extract
          APP=$(find build/bin -name "*.app" -maxdepth 1 | head -1)
          mkdir -p "$APP/Contents/MacOS/tor"
          cp tor-extract/tor/tor "$APP/Contents/MacOS/tor/"
          chmod +x "$APP/Contents/MacOS/tor/tor"
          [ -d tor-extract/data ] && cp -r tor-extract/data "$APP/Contents/MacOS/tor/data"

      - name: Create DMG
        run: |
          APP=$(find build/bin -name "*.app" -maxdepth 1 | head -1)
          mkdir -p dmg_contents
          cp -R "$APP" dmg_contents/
          ln -s /Applications dmg_contents/Applications
          hdiutil create -volname "Cryptographic Triangles" \
            -srcfolder dmg_contents \
            -ov -format UDZO \
            "Cryptographic-Triangles-v${VERSION}-macos-arm64.dmg"

      - name: Upload DMG
        uses: actions/upload-artifact@v4
        with:
          name: macos-arm64-dmg
          path: "*.dmg"

  release:
    if: startsWith(github.ref, 'refs/tags/v')
    needs: [build-windows-qt, build-windows-daemon, build-linux-qt, build-linux-daemon, build-macos]
    runs-on: ubuntu-latest
    permissions:
      contents: write
    steps:
      - name: Set VERSION from tag
        run: echo "VERSION=${GITHUB_REF_NAME#v}" >> $GITHUB_ENV

      - name: Download all artifacts
        uses: actions/download-artifact@v4
        with:
          path: artifacts

      - name: Prepare release assets
        run: |
          mkdir -p release
          # Windows Qt installer (setup.exe — includes Tor, Start Menu shortcuts, uninstaller)
          cp artifacts/windows-qt-setup/*.exe release/
          # Windows Qt portable zip (extract & run — no install required)
          cp artifacts/windows-qt-zip/*.zip release/
          # Windows daemon (zip with DLLs + Tor)
          cd artifacts/windows-daemon && zip -r "../../release/Cryptographic-Triangles-${VERSION}-win-x64-daemon.zip" . && cd ../..
          # Linux Qt .deb (dpkg -i to install — includes Tor, desktop entry, icon)
          cp artifacts/linux-qt-deb/*.deb release/
          # Linux daemon .deb (dpkg -i to install — includes Tor, systemd service)
          cp artifacts/linux-daemon-deb/*.deb release/
          # macOS DMG (drag to Applications — Tor inside .app bundle)
          cp artifacts/macos-arm64-dmg/*.dmg release/
          ls -la release/

      - name: Create Release
        uses: softprops/action-gh-release@v2
        with:
          files: release/*
          generate_release_notes: true

  trigger-tripi:
    name: Trigger TRI-PI ARM64 Build
    # Only fire on tag-push events. To trigger a TRI-PI rebuild after a
    # release is created via gh API (without re-pushing the tag), use:
    #   curl -X POST .../repos/SamiAhmed7777/tri-pi/dispatches \
    #     -d '{"event_type":"new-release","client_payload":{"version":"vX.Y.Z","source_repo":"SamiAhmed7777/triangles_v5"}}'
    if: startsWith(github.ref, 'refs/tags/v')
    needs: release
    runs-on: ubuntu-latest
    steps:
      - name: Dispatch tri-pi ARM64 build
        run: |
          curl -f -X POST \
            -H "Accept: application/vnd.github+json" \
            -H "Authorization: Bearer ${{ secrets.TRIPI_BUILD_TOKEN }}" \
            -H "X-GitHub-Api-Version: 2022-11-28" \
            https://api.github.com/repos/SamiAhmed7777/tri-pi/dispatches \
            -d '{"event_type":"new-release","client_payload":{"version":"${{ github.ref_name }}","source_repo":"SamiAhmed7777/triangles_v5"}}'
          echo "Triggered tri-pi repository_dispatch for ${{ github.ref_name }}"