Files

T

sami7777 aef95bdf78 Bump version to v5.9.3 and add RPC command reference

Pairs net.h heartbeat-throttle field with the IBD header-sync fix
in 2a484e4, and ships a full RPC reference doc.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

2026-04-24 22:16:19 -07:00

13 KiB

Raw Blame History

Triangles (TRI) RPC Command Reference

This document describes every RPC command available in the Triangles daemon (trianglesd) and Qt wallet. Connect via JSON-RPC on port 19112 (default). All commands can also be run from the Qt wallet's debug console.

Triangles is a Tor-only PoS cryptocurrency. PoW ended at block 9000; from block 9001 onward the chain is pure Proof-of-Stake with 33% annual interest (coin-age based). Block time is 2 minutes. Max supply is 2,222,222 TRI.

Server Control

Command	Parameters	Description
`help`	`[command]`	List all commands, or get detailed help for a specific command.
`stop`		Shut down the daemon.

Blockchain

Command	Parameters	Description
`getbestblockhash`		Returns the hash of the tip of the best chain.
`getblockcount`		Returns the current block height.
`getblockhash`	`<index>`	Returns the block hash at the given height.
`getblock`	`<hash> [txinfo]`	Returns block details for the given hash. Set `txinfo=true` for full transaction data.
`getblockbynumber`	`<number> [txinfo]`	Same as `getblock` but accepts a height instead of a hash.
`getblockheader`	`<hash> [verbose=true]`	Returns block header data. If verbose is false, returns hex-encoded header.
`getblockchaininfo`		Returns chain state info: chain name, block height, best hash, difficulty, etc.
`getdifficulty`		Returns current PoW and PoS difficulty values.
`gettxoutsetinfo`		Returns statistics about the UTXO set (total txouts, size, etc.).
`getrawmempool`		Returns all transaction IDs currently in the mempool.
`getcheckpoint`		Returns info about the current synchronized checkpoint.
`getchaintips`		Returns info about all known chain tips (forks).
`invalidateblock`	`<hash>`	Permanently marks a block as invalid and rewinds the chain past it.
`reconsiderblock`	`<hash>`	Removes the invalid mark from a previously invalidated block.
`recalculatesupply`		Recalculates money supply by summing all UTXOs. Updates the stored value at the chain tip and persists to disk. Returns old/new supply and difference.
`settxfee`	`<amount>`	Sets the transaction fee per kB. Amount is rounded to nearest 0.01.
`estimatefee`	`<nblocks>`	Estimates the fee per kB needed for confirmation within `nblocks` blocks.

Address Index

These commands query the address index. The daemon must be running with -addressindex=1.

Command	Parameters	Description
`getaddressbalance`	`{"addresses":["addr",...]}`	Returns confirmed balance for the given address(es).
`getaddressutxos`	`{"addresses":["addr",...]}`	Returns all unspent outputs for the given address(es).
`getaddresstxids`	`{"addresses":["addr",...], "start":n, "end":n}`	Returns transaction IDs for the given address(es), optionally filtered by block range.

Mining & Staking

Command	Parameters	Description
`getmininginfo`		Returns mining-related info: height, difficulty, network hashrate, etc.
`getstakinginfo`		Returns staking-related info: whether staking is active, weight, expected time to stake, etc.
`getsubsidy`	`[nTarget]`	Returns the PoW subsidy value for the given target height (historical reference only since PoW ended at block 9000).

Network

Command	Parameters	Description
`getconnectioncount`		Returns the number of peer connections.
`getpeerinfo`		Returns detailed info about each connected peer (address, version, ping time, etc.).
`getnetworkinfo`		Returns P2P network state: version, protocol, peer mix, connections, relay fee, etc.
`getseedlist`		Returns the list of configured seed nodes.
`addnode`	`<node> <add\|remove\|onetry>`	Add or remove a node from the manual peer list, or try connecting once. For Tor nodes use the `.onion` address.
`disconnectnode`	`<node>`	Immediately disconnects from the specified peer.
`sendalert`	`<message> <privatekey> <minver> <maxver> <priority> <id> [cancelupto]`	Broadcasts a network alert (requires the alert master private key).

Wallet — General

Command	Parameters	Description
`getinfo`		Returns general info: version, balance, stake, block height, connections, etc.
`getwalletinfo`		Returns wallet-specific info: balance, unconfirmed, immature, txcount, keypoolsize, etc.
`getbalance`	`[account] [minconf=1]`	Returns total available balance (optionally for a specific account).
`checkwallet`		Checks wallet database for consistency errors.
`repairwallet`		Attempts to repair the wallet database.
`resendtx`		Re-broadcasts all unconfirmed wallet transactions.

Wallet — Addresses & Accounts

Command	Parameters	Description
`getnewaddress`	`[account]`	Generates a new receiving address (optionally assigned to an account).
`getnewpubkey`	`[account]`	Returns a new public key for the wallet.
`getaccountaddress`	`<account>`	Returns the current receiving address for the given account.
`setaccount`	`<address> <account>`	Assigns an address to the given account label.
`getaccount`	`<address>`	Returns the account label for the given address.
`getaddressesbyaccount`	`<account>`	Returns all addresses assigned to the given account.
`listaddressgroupings`		Returns addresses grouped by common ownership (based on transaction history).
`validateaddress`	`<address>`	Validates a Triangles address and returns info (ismine, account, pubkey, etc.).
`validatepubkey`	`<pubkey>`	Validates a Triangles public key.
`listaccounts`	`[minconf=1]`	Returns all account names and their balances.

Wallet — Sending

Command	Parameters	Description
`sendtoaddress`	`<address> <amount> [comment] [comment-to]`	Sends TRI to an address. Returns the transaction ID.
`sendfrom`	`<fromaccount> <address> <amount> [minconf=1] [comment] [comment-to]`	Sends TRI from a specific account.
`sendmany`	`<fromaccount> {"addr":amount,...} [minconf=1] [comment]`	Sends TRI to multiple addresses in a single transaction.
`move`	`<fromaccount> <toaccount> <amount> [minconf=1] [comment]`	Moves funds between accounts (internal bookkeeping only, no on-chain tx).

Wallet — Transaction History

Command	Parameters	Description
`listtransactions`	`[account] [count=10] [from=0]`	Returns the most recent transactions (optionally filtered by account).
`listsinceblock`	`[blockhash] [target-confirmations]`	Returns all transactions since the given block.
`gettransaction`	`<txid>`	Returns detailed info about a wallet transaction.
`getreceivedbyaddress`	`<address> [minconf=1]`	Returns total amount received by an address.
`getreceivedbyaccount`	`<account> [minconf=1]`	Returns total amount received by an account.
`listreceivedbyaddress`	`[minconf=1] [includeempty=false]`	Returns amounts received for each address.
`listreceivedbyaccount`	`[minconf=1] [includeempty=false]`	Returns amounts received for each account.

Wallet — Staking Control

Command	Parameters	Description
`reservebalance`	`[reserve] [amount]`	Show or set a reserve balance that will not be used for staking. `reserve` is true/false, `amount` is the TRI to reserve.

Wallet — Security

Command	Parameters	Description
`encryptwallet`	`<passphrase>`	Encrypts the wallet with the given passphrase. This shuts down the daemon. The wallet must be re-started and unlocked afterward.
`walletpassphrase`	`<passphrase> <timeout> [stakingonly]`	Unlocks the wallet for `timeout` seconds. Set `stakingonly=true` to allow staking but prevent sending.
`walletpassphrasechange`	`<oldpassphrase> <newpassphrase>`	Changes the wallet encryption passphrase.
`walletlock`		Immediately locks the wallet (removes decryption key from memory).
`keypoolrefill`	`[new-size]`	Tops up the pre-generated key pool.
`makekeypair`	`[prefix]`	Generates a new public/private keypair (not added to wallet).

Wallet — Backup & Import

Command	Parameters	Description
`backupwallet`	`<destination>`	Copies `wallet.dat` to the given file path.
`dumpwallet`	`<filename>`	Exports all wallet private keys to a plaintext file.
`dumpprivkey`	`<address>`	Returns the private key (WIF format) for the given address.
`importwallet`	`<filename>`	Imports keys from a wallet dump file.
`importprivkey`	`<privkey> [label]`	Imports a single private key (WIF format) with optional label.

Wallet — Multisig

Command	Parameters	Description
`addmultisigaddress`	`<nrequired> ["key",...] [account]`	Creates an M-of-N multisig address. `nrequired` is the number of signatures needed.
`addredeemscript`	`<redeemScript> [account]`	Adds a P2SH redeem script to the wallet.

Wallet — Message Signing

Command	Parameters	Description
`signmessage`	`<address> <message>`	Signs a message with the private key of the given address.
`verifymessage`	`<address> <signature> <message>`	Verifies a signed message. Returns true/false.

Raw Transactions

Command	Parameters	Description
`listunspent`	`[minconf=1] [maxconf=9999999] ["addr",...]`	Returns unspent transaction outputs, optionally filtered by address and confirmation count.
`createrawtransaction`	`[{"txid":"id","vout":n},...] {"addr":amount,...}`	Creates an unsigned raw transaction from the given inputs and outputs.
`decoderawtransaction`	`<hex>`	Decodes a raw transaction hex string into a JSON object.
`decodescript`	`<hex>`	Decodes a hex-encoded script into human-readable form.
`signrawtransaction`	`<hex> [prevtxs] [privkeys] [sighashtype="ALL"]`	Signs a raw transaction. Can provide previous tx outputs and private keys for offline signing.
`sendrawtransaction`	`<hex>`	Broadcasts a signed raw transaction to the network. Returns the txid.
`getrawtransaction`	`<txid> [verbose=0]`	Returns raw transaction data. Set verbose=1 for decoded JSON output.

Secure Messaging (SMSG)

Triangles has a built-in encrypted peer-to-peer messaging system. Messages are stored in a DHT-like bucket system and relayed through the network.

Command	Parameters	Description
`smsgenable`		Enables the secure messaging system.
`smsgdisable`		Disables the secure messaging system.
`smsgoptions`	`[list\|set <optname> <value>]`	View or change secure messaging options.
`smsglocalkeys`	`[whitelist\|all\|wallet\|recv +/- <addr>\|anon +/- <addr>]`	Manage which local keys participate in secure messaging.
`smsgaddkey`	`<address> <pubkey>`	Adds someone's public key so you can send them encrypted messages.
`smsggetpubkey`	`<address>`	Retrieves the public key for an address (needed to send messages to it).
`smsgsend`	`<fromAddr> <toAddr> <message>`	Sends an encrypted message from one of your addresses to a recipient.
`smsgsendanon`	`<toAddr> <message>`	Sends an anonymous encrypted message (no sender address attached).
`smsginbox`	`[all\|unread\|clear]`	View received secure messages. Default shows unread.
`smsgoutbox`	`[all\|clear]`	View sent secure messages.
`smsgscanchain`		Scans the blockchain for secure message public keys.
`smsgscanbuckets`		Scans stored message buckets for messages addressed to your keys.
`smsgbuckets`	`[stats\|dump]`	View secure message bucket statistics or dump contents.
`smsgbroadcast`	`<fromAddr> <message>`	Broadcasts a message to all SMSG participants (not encrypted to a single recipient).

Quick Reference — Common Tasks

Check node status:

getinfo
getblockcount
getconnectioncount
getstakinginfo

Check balance and transactions:

getbalance
listtransactions

Send coins:

walletpassphrase "yourpassphrase" 60
sendtoaddress "TRIaddress" 100
walletlock

Unlock for staking only:

walletpassphrase "yourpassphrase" 999999999 true

Add a peer manually (Tor .onion):

addnode "abcdef1234567890.onion" "add"

Export/import a private key:

dumpprivkey "TRIaddress"
importprivkey "5KPrivKeyHere" "mylabel"

Fix incorrect money supply display:

recalculatesupply

Full reindex (rebuild block index from raw data):

trianglesd -reindex

Connection Info

Setting	Value
Default RPC port	19112
Default P2P port	24112
Config file (Windows)	`%APPDATA%\triangles\triangles.conf`
Config file (Linux)	`~/.triangles/triangles.conf`
Protocol version	70205
Network	Tor-only

13 KiB Raw Blame History