# sermon-clean

A one-shot CLI for sermon audio editing: **find** bad segments, **cut** them out, **paste** in ElevenLabs replacements. Built because doing this by hand every time is unbearable.

## Why

Recording a sermon is fine. Post-production is not. The current workflow needs:

1. Manually identify where the bad words are (the painful part — Whisper stalls on long audio, and eyeballing a waveform is imprecise)
2. Hand-write ffmpeg trim commands for each bad window
3. Render replacement clips via ElevenLabs
4. Hand-write the ffmpeg concat command
5. Manually upload to Dropbox

`sermon-clean` collapses steps 1-5 into one command (or a few, if you want to eyeball the audio first).

## Install

```bash
# Requires ffmpeg in PATH (sudo apt install ffmpeg on Debian/Ubuntu)
pip install sermon-clean

# Optional: for ElevenLabs auto-rendering
export ELEVENLABS_API_KEY=...
export ELEVENLABS_VOICE_ID=IYUnpZr9CQfSylOsOOBo  # your cloned voice

# Optional: for auto-detect mode (transcribe + find bad words)
pip install "sermon-clean[auto]"
```

## Usage

### One-shot: explicit timestamps + replacement text

```bash
sermon-clean pipe sermon.ogg \
    --bad "21:38-21:42:the actual sentence you meant to say" \
    --bad "1450.3-1453.1:the corrected phrase" \
    --elevenlabs-text \
    -o sermon-fixed.ogg
```

### Step-by-step workflow

```bash
# 1. Look at the audio — see its shape + find silence gaps
sermon-clean scan sermon.ogg --width 100

# 1b. Or: get a tabular index of silence runs (good for picking splice points)
sermon-clean si sermon.ogg --silence-threshold -35 --silence-min-duration 0.5

# 1c. Or: multiband waveform — N seconds per row, makes timestamp counting trivial
sermon-clean mb sermon.ogg --band-seconds 60 --width 80

# 1d. Or: silence stats — count/mean/longest silence. Use this to pick the right
# threshold for the next recording of the same speaker/room setup.
sermon-clean silence-stats sermon.ogg

# 1e. Or: auto-tune the silence threshold based on expected pause density.
# Useful when the same speaker records in different rooms and the silence
# profile changes week to week.
sermon-clean threshold-tune sermon.ogg --target-spm 4.0

# 1f. Or: pre-flight normalization — bring the recording to broadcast-standard
# loudness before doing any other processing.
sermon-clean normalize sermon.ogg -o sermon-normalized.ogg

# 1g. Or: light denoise (FFT-based) if the recording has hiss / mic preamp noise.
sermon-clean denoise sermon.ogg -o sermon-denoised.ogg

# 2. Or: extract overlapping slices for manual review
sermon-clean slices sermon.ogg --output-dir ./slices \
    --slice-seconds 5 --overlap-seconds 1
# Listen to ./slices/slice_000_0-00-0-05.ogg in your audio player.
# Filename embeds start/end timestamps.

# 3. Edit the JSON to mark bad segments + replacement text:
# segs.json:
# [
#   {"start": 1298.0, "end": 1302.0, "reason": "misspoke", "replacement_text": "the actual sentence"},
#   {"start": 1450.3, "end": 1453.1, "reason": "misspoke", "replacement_text": "the corrected phrase"}
# ]

# 4. Trim the original around the bad windows
sermon-clean cut sermon.ogg --segments-file segs.json

# 5. Render replacements (if you haven't already) and splice
sermon-clean paste sermon.ogg --segments-file segs.json \
    --replacements "replacements/*.mp3" \
    -o sermon-fixed.ogg
```

### Auto-detect mode (optional, requires `faster-whisper`)

```bash
sermon-clean auto sermon.ogg --bad-words "fuck,shit,damn" --output segs.json
# transcribes the audio, finds timestamps for any of the bad words,
# prints a suggested JSON file you can edit before splicing
```

## Subcommands

| Command | Purpose |
|---|---|
| `find` | Show audio metadata + silence gaps (no transcription) |
| `scan` | ASCII waveform + silence marks (no transcription) |
| `silence-index` (`si`) | Tabular list of silence runs with timestamps + position bar |
| `multiband` (`mb`) | Multi-row ASCII waveform with band-start labels for timestamp counting |
| `silence-stats` (`ss`) | Quantitative summary: count, mean, median, longest silence + density per minute |
| `threshold-tune` (`tt`) | Auto-pick the silence threshold that matches expected pause density |
| `normalize` (`norm`) | Apply EBU R128 loudness normalization (target LUFS, true peak, LRA) |
| `denoise` | Apply light FFT-based noise reduction (`afftdn`) for hiss / mic preamp noise |
| `slices` | Extract overlapping audio chunks for manual review |
| `cut` | Trim the original around bad windows (no splice) |
| `paste` | Splice pre-rendered replacements into the trimmed original |
| `auto` | Transcribe + find bad-word timestamps |
| `pipe` | Run cut + paste in one command |
| `batch` | Run any of the above across many files |

### Batch processing

Apply the same operation to many files at once:

```bash
# Normalize every sermon from this Sunday
sermon-clean batch normalize 'sermons/*.ogg' --output-dir fixed/ --suffix=-normalized

# Denoise a batch of older recordings
sermon-clean batch denoise 'archive/*.wav' --output-dir fixed/ --suffix=-dn

# Silence stats for every recording (no output files — runs the stats print)
sermon-clean batch silence-stats 'sermons/*.ogg' --output-dir stats/
```

Failures are collected, not raised: if one file is corrupt, the rest still process.

## How it works

- **Find** → `ffmpeg silencedetect` for natural breath pauses, plus your explicit timestamps
- **Cut** → trim the original into N+1 good segments using ffmpeg, re-encoding to the source codec (no `wav` intermediate — bitrate-matched)
- **Paste** → ElevenLabs renders + ffmpeg concat with bit-exact `-c copy` (no audible clicks at splice boundaries)
- **Verify** → ffprobe the output duration against expected; if it drifted >1s, the splice silently changed the runtime

## Why this exists

The previous workflow (`audio-splice-workflow.md` in krystie-profile) was a 5-step manual recipe that's already broken twice. Each fix took 30+ minutes of bash. This package makes the same workflow a one-line command.

## Performance

- `scan` on a 27-min audio: ~50s (Opus decode is the bottleneck on this CPU)
- `slices` on a 27-min audio with 5-sec slices: ~50s
- `auto` on a 27-min audio: ~10-20 min with `tiny.en` model on CPU. Use `base.en` or `small.en` for better accuracy at 2-4x the time. Whisper `tiny.en` is the right model for finding a known bad-word list — you don't need higher accuracy than "did the word 'fuck' appear at all."
- `normalize` on a 27-min audio: ~30-60s (two-pass EBU R128 measurement + apply)
- `denoise` on a 27-min audio: ~45-90s (FFT pass over the whole file)
- `silence-stats` and `threshold-tune` on a 27-min audio: ~5s (just runs silencedetect with multiple thresholds)
- `batch`: adds ~5s of subprocess overhead per file on top of the operation cost

## Development

```bash
git clone https://git.sami/sami7777/sermon-clean.git
cd sermon-clean
pip install -e ".[test,auto]"
pytest    # 61 tests, ~17s
```

## License

MIT — see LICENSE.